Silane, (1,1-diMethylethyl)triMethoxy-
T-Butyltrimethoxysilane
CAS: 18395-29-4
Molecular Formula: C7H18O3Si
Silane, (1,1-diMethylethyl)triMethoxy- - Names and Identifiers
| Name | T-Butyltrimethoxysilane |
| Synonyms | T-Butyltrimethoxysilane T-BUTYLTRIMETHOXYSILANE tert-butyl(trimethoxy)silane Silane, (1,1-diMethylethyl)triMethoxy- |
| CAS | 18395-29-4 |
| InChI | InChI=1/C7H18O3Si/c1-7(2,3)11(8-4,9-5)10-6/h1-6H3 |
Silane, (1,1-diMethylethyl)triMethoxy- - Physico-chemical Properties
| Molecular Formula | C7H18O3Si |
| Molar Mass | 178.3 |
| Density | 0,903 g/cm3 |
| Melting Point | <0°C |
| Boling Point | 140-141°C |
| Flash Point | 33°C |
| Vapor Presure | 7.61mmHg at 25°C |
| Specific Gravity | 0.903 |
| Sensitive | 7: reacts slowly with moisture/water |
| Refractive Index | 1.3941 |
Silane, (1,1-diMethylethyl)triMethoxy- - Risk and Safety
| Risk Codes | R10 - Flammable R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| UN IDs | 1993 |
| TSCA | No |
Silane, (1,1-diMethylethyl)triMethoxy- - Introduction
T-Butyltrimethoxysilane, the chemical formula is (CH3O)3SiC(CH3)3, which is an organosilicon compound. The following is the nature, use, preparation and safety information of the T-Butyltrimethoxysilane:
Nature:
1. Appearance: colorless liquid
2. Molecular Weight: 148.29g/mol
3. Melting Point: ≈-100 ° C
4. Boiling Point: 101-102 ° C
5. Density: 0.798 g/cm
6. Solubility: soluble in alcohol, ether and other organic solvents, slightly soluble in water
7. Stability: relatively stable, when encountering moisture and humidity in the air, it will slowly hydrolyze to produce methanol and dimethoxysilane
Use:
1. T-Butyltrimethoxysilane commonly used in organic synthesis of protecting group reagent, in the synthesis of compounds can protect the reactivity of some functional groups.
2. It can also be used as a solvent, as a catalyst carrier or reaction medium in some reactions.
Method:
T-Butyltrimethoxysilane can be prepared by the following steps:
1. First, the reaction of tert-butyl silicon chloride and chloro methanol to generate tert-butyl trichlorosilane.
2. The tert-butyl trichlorosilane is then reacted with methanol to generate tert-butyl trimethoxysilane.
Safety Information:
1. T-Butyltrimethoxysilane is irritating and corrosive to the skin, and skin contact should be avoided when in contact.
2. Inhalation or swallowing T-Butyltrimethoxysilane may cause irritation to the respiratory and digestive systems. Avoid inhalation or contact with food.
3. When using T-Butyltrimethoxysilane, avoid contact with oxidants to avoid dangerous reactions.
4. Waste should be handled in accordance with local regulations to avoid environmental pollution.
Nature:
1. Appearance: colorless liquid
2. Molecular Weight: 148.29g/mol
3. Melting Point: ≈-100 ° C
4. Boiling Point: 101-102 ° C
5. Density: 0.798 g/cm
6. Solubility: soluble in alcohol, ether and other organic solvents, slightly soluble in water
7. Stability: relatively stable, when encountering moisture and humidity in the air, it will slowly hydrolyze to produce methanol and dimethoxysilane
Use:
1. T-Butyltrimethoxysilane commonly used in organic synthesis of protecting group reagent, in the synthesis of compounds can protect the reactivity of some functional groups.
2. It can also be used as a solvent, as a catalyst carrier or reaction medium in some reactions.
Method:
T-Butyltrimethoxysilane can be prepared by the following steps:
1. First, the reaction of tert-butyl silicon chloride and chloro methanol to generate tert-butyl trichlorosilane.
2. The tert-butyl trichlorosilane is then reacted with methanol to generate tert-butyl trimethoxysilane.
Safety Information:
1. T-Butyltrimethoxysilane is irritating and corrosive to the skin, and skin contact should be avoided when in contact.
2. Inhalation or swallowing T-Butyltrimethoxysilane may cause irritation to the respiratory and digestive systems. Avoid inhalation or contact with food.
3. When using T-Butyltrimethoxysilane, avoid contact with oxidants to avoid dangerous reactions.
4. Waste should be handled in accordance with local regulations to avoid environmental pollution.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: T-BUTYLTRIMETHOXYSILANE Visit Supplier Webpage Request for quotation
CAS: 18395-29-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18395-29-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: T-BUTYLTRIMETHOXYSILANE Visit Supplier Webpage Request for quotation
CAS: 18395-29-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 18395-29-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Silane, (1,1-diMethylethyl)triMethoxy-
4-(1H-imidazol-1-yl)benzaldehyde
11-OCTADECENOIC ACID (TRANS)
D(-)-2-Aminobutyric acid
Janelia Fluor 549,SE
5-乙酰基-2,3-二氢苯并[B]呋喃
Benzyl disulfide
200207-28-9
Sodium ATMP
1,4-环己二酮单缩酮
4-(1H-imidazol-1-yl)benzaldehyde
11-OCTADECENOIC ACID (TRANS)
D(-)-2-Aminobutyric acid
Janelia Fluor 549,SE
5-乙酰基-2,3-二氢苯并[B]呋喃
Benzyl disulfide
200207-28-9
Sodium ATMP
1,4-环己二酮单缩酮